Musto Skiff

Modified "boatbreaker" (Huud Ouwehand)




I use two Ronstan tripleblocks one with a cleat, an S-hook, a wide shackle and some rope to build the boatbreaker. I also replaced the standard chainplate with one used on the 49er. It has holes wide enough to attach the boatbreaker to.














This shot compares the shackle with the one used with the main halyard.















You only have to pull the forestay one or two cm further down to apply the right tension to the rig because the chainplate will not be pushed forward due to the boatbreaker being attached to the chainplate.

Note: put the line trough the blocks as shown in the picture, because if you keep the blocks parallel to each other, the line will get lots of resistance due to crossing lines!

See other Pimps

Send us your mods to feature in "Pimp My Skiff"

NOTE: It is recommended to use a shackel at the top not a hook as shown below as the hook can open up under tension leading to the mast coming crashing down :-(

 When you want the best ... you can have it
The MUSTO Skiff is marketed world wide by Ovington Boats.
Please contact us on +44 191 257 6011 or
email us for more details.
Below are our key suppliers

Ovington BoatsHull
The highest standards by a gold medal winning builder
Harken, the best hardware available, it will never let you down
High tech carbon mast with "Step Down taper system" technology
One-design sails by the best in the game

  ©2002 - 2019 All rights reserved.   Ovington Boats Limited :  Privacy Policy : Terms and Conditions
This site was designed and implemented by .... Force 5 Marketing