Bolt Pimp (Rick Perkins)
This mod has been developed to stop you
trashing the inside of your sail as per the picture
below (this was after one sail ...) and to make sure
there is no play in the system so the vang lever (the
flat bit) dosn't wear.
- Small bit of progrip
Insert the vang lever (the flat arced
bit) between the two box sectinos and snug the bolt
up so the lever can move but not wobble around; then
File the end of the bolt flush with the
nut and file any sharp bits of the other end of the
Then put a small square of pro grip over
the ends to stop it wearing the sail.
us your mods to feature in "Pimp My Skiff"