Modification (Rick Perkins)
This mod has been developed to tidy up
the tail of the mainsheet and to make it easier to see
which bit to pull.
- Two colours of mainsheet rope
- Stainless Ring & short bit of string.
- Lenth of 3mm elastic
Tie the two bits of mainsheet together
such that the knot is the stopper knot for when the
boom is about to hit the shroud.
Tie the stianless ring with the string
between the two kite halyard blocks.
Run the tail of the mainsheet through
the ring and tie the elastic on the tail then
run the elastic up to the bow. Having a two colour nainsheet
makes it easy to see which bit to pull then your out
on the wire and the sheet is laying over the wing or
is clipped into your harness.
us your mods to feature in "Pimp My Skiff"