Musto Performance Skiff

Kite Sheet Modification (Rick Perkins)

This mod has been developed to tidy up the kite sheets as you pull the kite down

 

 

Mode Requires:

- 3mm elastic
- 3 plastic rings
- Double block

Instructions:

Tie one platic ring on the back of the drinks carrier (red arrow).

Then place a plastic ring on each kite sheet (blue arrow)

Then tie the elastic to each ring and run it through the ring on the boom. Then round a pully tied at the bow then the end goes onto the aft end of the pole.

That way when the kite goes up and the pole out the elastic slackens off and the sheets run free. As the kite comes down and the pole comes in the elastic is pulled tight pulling the kite sheets on board

Verdict: PIMPED

See other Pimps

Send us your mods to feature in "Pimp My Skiff"

 

 

 

 When you want the best ... you can have it
The MUSTO Skiff is marketed world wide by Ovington Boats.
Please contact us on +44 191 257 6011 or
email us for more details.
Below are our key suppliers

Ovington BoatsHull
The highest standards by a gold medal winning builder
HarkenHardware
Harken, the best hardware available, it will never let you down
SeldenSpars
High tech carbon mast with "Step Down taper system" technology
HydeSails
One-design sails by the best in the game

  © 2002 - 2016 All rights reserved.   Ovington Boats Limited :  Privacy Policy : Terms and Conditions
This site was designed and implemented by Force 5 Marketing. trading as Marketing on a Shoestring